Home › Engine / Hybrid System › 1GD-FTV (EMISSION CONTROL) › EGR VALVE (w/ EGR Cooler) › 2019.02–2019.06
RM35X0E _51 Engine / Hybrid System _079220 1GD-FTV EMISSION CONTROL _0384171 EGR VALVE(w/ EGR Cooler) G

1GD-FTV EMISSION CONTROL  EGR VALVE(w/ EGR Cooler)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
A343690

To prevent injury due to contact with an operating fan and generator V belt or cooling fan, keep your hands and clothing away from the fan and generator V belt and cooling fans when working in the engine compartment with the engine running.


PROCEDURE

Hide 25630 1.INSPECT NO. 2 EGR VALVE ASSEMBLY (for Single Actuator EGR Bypass Valve)

a.

When using the GTS:

i.
A344467C01
1.635,1.031 2.01,0.427 2.01,0.427 2.177,0.427 true 0.531,0.833 0.75,1 0.219,0.167 10 true *b 0.698,1.51 0.917,1.677 0.219,0.167 10 true *c 2.198,0.313 2.417,0.479 0.219,0.167 10 true *a
*a EGR Cooler By-pass Valve Regulating Link
*b Bypass Position
*c Cooler Position


With the engine stopped, check that the EGR cooler by-pass valve regulating link is in the bypass position as shown in the illustration.


ii.

Connect the GTS to the DLC3.


iii.

Turn the GTS on.


iv.

Start the engine.


v.

Enter the following menus: Powertrain / Engine / Active Test / Active the VSV for EGR Cooler Bypass.

Powertrain > Engine > Active Test
Tester Display
Activate the VSV for EGR Cooler Bypass
50004 372 42025
OK:
Control Range Condition Specified Condition
Bypass → Cooler EGR cooler by-pass valve regulating link changes according to Active Test operation




b.

When not using the GTS:

i.
A344467C01
1.635,1.031 2.01,0.427 2.01,0.427 2.177,0.427 true 0.531,0.833 0.75,1 0.219,0.167 10 true *b 0.698,1.51 0.917,1.677 0.219,0.167 10 true *c 2.198,0.313 2.417,0.479 0.219,0.167 10 true *a
*a EGR Cooler By-pass Valve Regulating Link
*b Bypass Position
*c Cooler Position


With the engine stopped, check that the EGR cooler by-pass valve regulating link is in the bypass position as shown in the illustration.


ii.

Start the engine.


iii.

Warm up the engine.


iv.

When the engine coolant temperature is 70°C (158°F) or more, racing the engine at 1500 rpm or more, check that the EGR cooler by-pass valve regulating link is in the cooler position. The EGR cooler by-pass valve regulating link returns to the bypass position when idling.



Hide 25630 2.INSPECT NO. 2 EGR VALVE ASSEMBLY (for Double Actuator EGR Bypass Valve)

a.
A442614C01
1.583,0.552 1.917,0.302 1.917,0.302 2.083,0.302 true 2.104,0.208 2.354,0.375 0.25,0.167 10 true *a 0.51,0.396 0.74,0.563 0.229,0.167 10 true *b 0.5,0.823 0.729,0.99 0.229,0.167 10 true *c 0.688,1.104 0.938,1.26 0.25,0.156 10 true *d
*a EGR Cooler By-pass Valve Regulating Link
*b Bypass Position
*c Half Opened Position
*d Cooler Position


With the engine stopped, check that the EGR cooler by-pass valve regulating link is in the bypass position as shown in the illustration.


b.

Connect the GTS to the DLC3.


c.

Turn the GTS on.


d.

Start the engine.


e.

Enter the following menus: Powertrain / Engine / Active Test / Active the VSV for EGR Cooler Bypass.

Powertrain > Engine > Active Test
Tester Display
Activate the VSV for EGR Cooler Bypass
50004 372 42025
OK:
Control Range Condition Specified Condition
Bypass → Half Pos → Cooler EGR cooler by-pass valve regulating link changes according to Active Test operation