89425
1.INSPECT EXHAUST GAS TEMPERATURE SENSOR
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 89.3 to 159.8 kΩ |
The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.
If the result is not as specified, replace the exhaust gas temperature sensor.
89425A
2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 89.3 to 159.8 kΩ |
The temperature indicated in "Condition" is the temperature of the No. 2 exhaust gas temperature sensor.
If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.
89425B
3.INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 89.3 to 159.8 kΩ |
The temperature indicated in "Condition" is the temperature of the No. 3 exhaust gas temperature sensor.
If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.