Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER
RM35X0E _53 Suspension _078876 FRONT SUSPENSION _0384536 FRONT SUSPENSION MEMBER A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL HOLE PLUG

a.

Install the 10 hole plugs to the front frame assembly.

HINT:

There are 2 different shapes of hole plug.


C410941N01
2.75,1.594 2.906,1.792 0.156,0.198 10 true A 3.156,1.813 3.313,2.01 0.156,0.198 10 true A 3.604,1.333 3.76,1.531 0.156,0.198 10 true B 4.219,1.219 4.375,1.417 0.156,0.198 10 false B 4.406,1.021 4.563,1.219 0.156,0.198 10 false B 4.833,1.063 4.99,1.26 0.156,0.198 10 false B 3.823,0.458 3.979,0.656 0.156,0.198 10 false B 3.5,0.271 3.656,0.469 0.156,0.198 10 false B 3.021,0.521 3.177,0.719 0.156,0.198 10 false B 2.313,0.531 2.469,0.729 0.156,0.198 10 false B


Hide 48069 2.TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

a.

Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front frame assembly with the 2 bolts and 2 nuts.


Hide 48068 3.TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 44250 4.INSTALL RACK AND PINION POWER STEERING GEAR ASSEMBLY

Hide 5.INSTALL FRONT STABILIZER BAR WITH BRACKET

a.
C410944C01
2.26,0.74 1.844,1.073 1.844,1.073 1.677,1.073 true 1.5,1.01 1.833,1.26 0.333,0.25 10 false *a 1.333,1.406 1.5,1.573 0.167,0.167 10 true A 2.094,2.865 2.26,3.031 0.167,0.167 10 true B
*a Arrow
V100136

Front of the Vehicle


Install the front stabilizer bar with the front No. 1 stabilizer bracket LH, front No. 1 stabilizer bracket RH, front No. 1 stabilizer bar bushing LH and front No. 1 stabilizer bar bushing RH to the front frame assembly.


b.

Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

Torque:
135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:
·

Make sure to install the front No. 1 stabilizer bracket LH with its arrow facing the inside of the vehicle.

·

Temporarily tighten the bolt (A) and (B), and then fully tighten the 2 bolts in the order of (A) and (B).




c.

Install the front No. 1 stabilizer bracket RH to the front frame assembly with the 2 bolts.

HINT:

Perform the same procedure as for the LH side.



Hide 48069 8.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

a.

Install the front lower No. 1 suspension arm sub-assembly LH to the front frame assembly with the 2 bolts and 2 nuts.

Torque:
270 N*m (2753 kgf*cm, 199 ft.*lbf)


Hide 48068 9.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.