If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
88211B
1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
|
Bolt |
|
Screw |
Attach the guide.
Temporarily install the millimeter wave radar sensor assembly with the 2 bolts and screw.
Tighten the 2 bolts and screw in the order shown in the illustration.
53101
2.INSTALL RADIATOR GRILLE SUB-ASSEMBLY
3.ADJUST MILLIMETER WAVE RADAR SENSOR
When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT