87103D
1.INSTALL REAR BLOWER WITH FAN MOTOR SUB-ASSEMBLY
Install the rear blower with fan motor sub-assembly with the 3 screws.
Use the same procedure for the other side.
Attach the guide to install the rear cooling unit case RH with the 8 screws.
Attach the guide to install the rear cooling unit case LH with the 7 screws.
Attach the claw to install the pipe clamp.
Install each hose.
Connect each connector and attach the clamp to install the cool wiring.
87030A
2.INSTALL REAR COOLING UNIT ASSEMBLY