85110R
1.INSPECT REAR WIPER MOTOR ASSEMBLY
| *a | Component without harness connected
(Rear Wiper Motor Assembly) |
Check that the rear wiper motor assembly operates.
Check that the body ground is connected.
Check that the rear wiper motor assembly operates when battery voltage is applied to the terminals.
| Battery Connection | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4 (B)
Battery negative (-) → Terminal 1 (+1) Battery negative (-) → Terminal 3 (E) |
Motor operates |
If the result is not as specified, replace the rear wiper motor assembly.