Home › Vehicle Exterior › HORN › HORN › 2019.02–2019.06
RM35X0E _59 Vehicle Exterior _079321 HORN _0385005 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY (for 2-piece Type)

a.
B221681C24
0.094,0.073 0.458,0.417 0.365,0.344 10 false *a
*a Component without harness connected
(High Pitched Horn Assembly)


Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
High pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY

a.
B221681C25
0.094,0.094 0.458,0.438 0.365,0.344 10 false *a
*a Component without harness connected
(Low Pitched Horn Assembly)


Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.