CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
| *A | for LHD | *B | for RHD |
| *1 | Main Body ECU (Multiplex Network Body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| A-11 (GND1) - Body ground | - | - | Ground | Always | Below 1 Ω | - |
| A-30 (ACC) - Body ground | - | Input | ACC power supply | Ignition switch ACC | 11 to 14 V | ACC SW |
| Ignition switch off | Below 1 V | |||||
| A-31 (BECU) - Body ground | - | Input | Battery power supply | Always | 11 to 14 V | - |
| A-32 (IG) - Body ground | - | Input | IG power supply | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
IG SW |
| Ignition switch off | Below 1 V |
*1: w/o Stop and Start System
*2: w/ Stop and Start System
Install the main body ECU (multiplex network body ECU) to the instrument panel junction block assembly.
for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>INSTALLATION
for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>INSTALLATION
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Input/Output | Terminal Description | Condition | Specified Condition | Related Data List Item |
|---|---|---|---|---|---|---|
| N19-1 (FLCY) - Body ground | R - Body ground | Input | Front door courtesy light switch assembly LH input | Front door LH open → closed | Below 1 V → 4.7 to 5.3 V | FL Door Courtesy SW |
| N19-6 (FRCY) - Body ground | R - Body ground | Input | Front door courtesy light switch assembly RH input | Front door RH open → closed | Below 1 V → 4.7 to 5.3 V | FR Door Courtesy SW |
| 3D-24 (LCTY) - Body ground*1 | LA-R - Body ground | Input | Slide door courtesy light switch assembly LH input | Slide door LH open → closed | Below 1 V → 4.7 to 5.3 V | RL Door Courtesy SW |
| 3A-31 (RCTY) - Body ground*2 | LA-G - Body ground | Input | Slide door courtesy light switch assembly RH input | Slide door RH open → closed | Below 1 V → 4.7 to 5.3 V | RR Door Courtesy SW |
| N20-18 (L2) - Body ground | W - Body ground | Input | Driver and front passenger door key-linked lock input | Driver or front passenger door key cylinder turned to neutral position → on (lock) | Pulse generation → Below 1 V | Door Key SW-Lock |
| N20-17 (UL3) - Body ground | Y - Body ground | Input | Driver door key-linked unlock input | Driver door key cylinder turned to neutral position → on (unlock) | Pulse generation → Below 1 V | D Door Key SW-UL |
| N20-19 (UL2) - Body ground*3 | Y - Body ground | Input | Front passenger door key-linked unlock input | Front passenger door key cylinder turned to neutral position → on (unlock) | Pulse generation → Below 1 V | Door Key SW-Unlock |
| 3D-6 (ACT+) - Body ground | LA-LG - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-2 (ACT+) - Body ground | LA-L - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (lock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-1 (ACT-) - Body ground | LA-W - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3D-9 (ACT-) - Body ground | LA-R - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3D-18 (ACT-) - Body ground | LA-L - Body ground | Output | Door lock motor lock drive output | Door control switch or door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-4 (ACTD) - Body ground | LA-R - Body ground | Output | Driver door lock motor unlock drive output | Door control switch or driver door key cylinder off → on (unlock) | Below 1 V → 11 to 14 V → Below 1 V | - |
| 3B-12 (LSFR) - Body ground | B - Body ground | Input | Front door RH unlock detection switch input | Front door RH locked → unlocked | Pulse generation → Below 1 V | FR Door Lock Pos |
| 3B-13 (LSFL) - Body ground | B - Body ground | Input | Front door LH unlock detection switch input | Front door LH locked → unlocked | Pulse generation → Below 1 V | FL Door Lock Pos |
| N18-20 (LSWR) - Body ground*2 | L - Body ground | Input | Slide door RH unlock detection switch input | Slide door RH locked → unlocked | Pulse generation → Below 1 V | RR-Door Lock Pos SW |
| 3B-14 (LSWL) - Body ground*1 | L - Body ground | Input | Slide door LH unlock detection switch signal | Slide door LH locked → unlocked | Pulse generation → Below 1 V | RL-Door Lock Pos SW |
| 3D-34 (BCTY) - Body ground | L - Body ground | Input | Back door courtesy light switch input | Back door closed | Below 1 V | Back Door Courtesy SW |
| Back door open | Pulse generation |
*1: w/ Slide Door LH
*2: w/ Slide Door RH
*3: w/ Front Passenger Side Door Key Cylinder