75770
1.REMOVE FRONT HOOD MOULDING ASSEMBLY
53341B
2.REMOVE HOOD INSULATOR (w/ Hood Insulator)
Using a clip remover, remove the 6 clips and hood insulator.
55879C
3.REMOVE COWL VENT SEAL
Detach the clip and remove the cowl vent seal.
85035
4.REMOVE WASHER NOZZLE SUB-ASSEMBLY
Use the same procedure for the RH and LH sides.
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE>REMOVAL
85373
5.DISCONNECT WINDSHIELD WASHER HOSE
| *a | Clamp |
| *b | Guide |
Detach the clamp and guide to disconnect the windshield washer hose.
53381
6.REMOVE HOOD TO RADIATOR SUPPORT SEAL
Detach the clip and remove the hood to radiator support seal.