Home › Engine / Hybrid System › 7GR-FKS (INTAKE / EXHAUST) › INTAKE AIR CONTROL VALVE ACTUATOR
RM35X0E _51 Engine / Hybrid System _079308 7GR-FKS INTAKE / EXHAUST _0385726 INTAKE AIR CONTROL VALVE ACTUATOR A

7GR-FKS INTAKE / EXHAUST  INTAKE AIR CONTROL VALVE ACTUATOR  REMOVAL  


PROCEDURE

Hide 85110 1.REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

Hide 47220D 2.DISCONNECT BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

Hide 55738D 3.REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL

Hide 55701J 4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

Hide 17335 5.REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

a.
A436927

Remove the 2 bolts to disconnect the engine wire from the intake air surge tank assembly.


b.
A437889

Disconnect the intake air control valve actuator connector from the intake air control valve actuator.


c.

Remove the 3 bolts and intake air control valve actuator from the intake air surge tank assembly.