Home › Engine / Hybrid System › 7GR-FKS (COOLING) › WATER PUMP
RM35X0E _51 Engine / Hybrid System _079310 7GR-FKS COOLING _0386772 WATER PUMP A

7GR-FKS COOLING  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 16100 1.INSTALL ENGINE WATER PUMP ASSEMBLY

a.
A442761C01
0,0 0,0 false
V100135

Bolt A
V100136

Bolt B
V100137

Bolt C
V100138

Bolt D


Install a new water pump gasket and engine water pump assembly with the 15 bolts.

Torque:
for bolt A and B : 11 N*m (112 kgf*cm, 8 ft.*lbf)
for bolt C : 21 N*m (214 kgf*cm, 15 ft.*lbf)
for bolt D : 43 N*m (438 kgf*cm, 32 ft.*lbf)

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


Standard Length:
Item Length
Bolt A, B 22 mm (0.866 in.)
Bolt C 55 mm (2.17 in.)
Bolt D 60 mm (2.36 in.)


NOTICE:
·

Make sure that there is no oil on the threads of the bolts C and D.

·

Be sure to replace the 2 bolts B with new ones or reuse them after applying adhesive.

·

Do not start the engine for at least 1 hour after installation.




Hide 16604 2.INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.
A442759

Install the 2 No. 2 idler pulley sub-assemblies with the 2 bolts.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


Hide 44310 3.CONNECT VANE PUMP ASSEMBLY

a.
A442758

Connect the vane pump assembly with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


b.
A442757C01
1.844,0.865 2.813,0.573 true 2.813,0.458 3.042,0.635 0.229,0.177 10 true *1
*1 Wiring Harness Clamp Bracket
V100135

Connector
V100136

Bolt


Connect the wiring harness clamp bracket with the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


c.

Connect the connector.


Hide 16620 4.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 88320 5.INSTALL COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)

Hide 16631D 6.INSTALL NO. 1 IDLER PULLEY BRACKET (w/o Air Conditioning System)

a.
A443920

Install the No. 1 idler pulley bracket with the 3 bolts.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 16031 7.INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

Hide 16281 8.CONNECT NO. 4 WATER BY-PASS HOSE

Hide 16267 9.CONNECT NO. 3 WATER BY-PASS HOSE

Hide 16295 10.CONNECT NO. 7 WATER BY-PASS HOSE

Hide 16572D 12.INSTALL NO. 2 RADIATOR HOSE

Hide 16571C 13.INSTALL NO. 1 RADIATOR HOSE

Hide 16470 14.INSTALL RADIATOR RESERVE TANK ASSEMBLY

Hide 44360 15.CONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

Hide 17751 16.INSTALL NO. 1 AIR CLEANER INLET

Hide 53106B 17.INSTALL RADIATOR COVER SUB-ASSEMBLY

Hide 11209 18.INSTALL V-BANK COVER SUB-ASSEMBLY (w/ Cover)

Hide 19.ADD ENGINE COOLANT

Hide 51405A 21.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52618 22.INSTALL LOWER FRONT BUMPER ABSORBER

Hide 51406A 23.INSTALL NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)