Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › MASS AIR FLOW METER
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0387392 MASS AIR FLOW METER A

1GD-FTV ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

a.
A443556

Install the intake mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

Torque:
1.0 N*m (10 kgf*cm, 9 in.*lbf)


b.

Connect the intake mass air flow meter connector.