Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Separate Seat Type) › 2019.02–2019.06
RM35X0E _58 Vehicle Interior _078602 SEAT BELT _0387848 FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

a.

w/o Sub Wire Harness:

i.
B542828C02
0.167,0.167 0.479,0.365 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the front seat inner belt assembly LH.

6 - 4 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher




b.

w/ Sub Wire Harness:

i.
B542827C02
0.271,0.198 0.583,0.354 0.313,0.156 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the front seat inner belt assembly LH.

4 - 3 seat belt unfastened Below 1 Ω
seat belt fastened 10 kΩ or higher




Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

a.

w/o Front Seat Side Airbag:

i.
B542829C05
1.542,0.281 1.854,0.438 0.313,0.156 10 false *a 1.563,2.344 1.875,2.5 0.313,0.156 10 false *b 0.125,0.073 0.438,0.229 0.313,0.156 10 false *c
*a Connector A
*b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly RH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the front seat inner belt assembly RH.

A-4 - B-3 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
A-6 - B-1 Always Below 1 Ω




b.

w/ Front Seat Side Airbag:

i.
B542830C02
1.542,0.26 1.854,0.417 0.313,0.156 10 false *a 1.583,2.583 1.896,2.74 0.313,0.156 10 false *b 0.104,0.063 0.417,0.219 0.313,0.156 10 false *c
*a Connector A
*b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly RH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the front seat inner belt assembly RH.

A-3 - B-3 Seat belt unfastened Below 1 Ω
Seat belt fastened 10 kΩ or higher
A-4 - B-1 Always Below 1 Ω