Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ EGR Cooler)
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0388653 ECD SYSTEM(w/ EGR Cooler) D

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ EGR Cooler)  SYSTEM DESCRIPTION  


ENGINE CONTROL SYSTEM


A444458C01
1.01,5.219 1.177,4.885 1.177,4.885 1.323,4.885 false 0.646,6.844 0.76,6.844 0.76,6.844 0.854,6.354 false 3.156,6.813 3.271,6.813 3.271,6.813 3.396,6.333 false 4.167,0.854 4.479,1.052 0.313,0.198 10 false *1 4.198,1.708 4.51,1.906 0.313,0.198 10 false *25 6.365,0.427 6.677,0.625 0.313,0.198 10 false *3 6.76,1.198 7.073,1.396 0.313,0.198 10 false *2 5.063,3.031 5.375,3.229 0.313,0.198 10 false *7 3.885,3.323 4.198,3.521 0.313,0.198 10 false *6 3.229,2.844 3.542,3.042 0.313,0.198 10 false *5 2.583,3.25 2.896,3.448 0.313,0.198 10 false *4 3.208,3.74 3.521,3.938 0.313,0.198 10 false *8 4.135,3.885 4.448,4.083 0.313,0.198 10 false *9 1.313,0.469 1.625,0.667 0.313,0.198 10 false *24 1.365,4.813 1.677,5.01 0.313,0.198 10 false *10 0.615,5.917 0.927,6.115 0.313,0.198 10 false *16 0.417,6.76 0.729,6.958 0.313,0.198 10 false *17 2.927,6.771 3.24,6.969 0.313,0.198 10 false *18 3.521,5.823 3.833,6.021 0.313,0.198 10 false *14 4.042,5.958 4.354,6.156 0.313,0.198 10 false *19 4.677,6.156 4.99,6.354 0.313,0.198 10 false *15 5.51,6.688 5.823,6.885 0.313,0.198 10 false *21 4.875,6.688 5.188,6.885 0.313,0.198 10 false *20 4.271,7.167 4.583,7.365 0.313,0.198 10 false *22 3.031,7.792 3.344,7.99 0.313,0.198 10 false *23 1.063,5.323 1.375,5.521 0.313,0.198 10 false *11 4.375,4.719 4.688,4.917 0.313,0.198 10 false *13 3.688,4.906 4,5.104 0.313,0.198 10 false *12 2.958,5.906 3.417,6.104 0.458,0.198 10 false *26
*1 ECM *2 Fuel Supply Pump Assembly
*3 Pre-stroke Control Valve *4 Fuel Pressure Sensor
*5 Common Rail Assembly *6 Pressure Discharge Valve
*7 Glow Plug Controller *8 Intercooler Assembly
*9 Intake Air Temperature Sensor (Turbo) *10 Mass Air Flow Meter Sub-assembly
*11 Intake Air Temperature Sensor (Built Into Mass Air Flow Meter Sub-assembly) *12 No. 1 EGR Cooler
*13 Vacuum Switching Valve Assembly (for EGR Bypass Valve) *14 Injector Assembly
*15 Electric EGR Control Valve Assembly *16 Nozzle Vane Position Sensor
*17 Variable Vane DC Motor *18 Camshaft Position Sensor
*19 Glow Plug Assembly *20 Manifold Absolute Pressure Sensor
*21 Diesel Throttle Body Assembly *22 Engine Coolant Temperature Sensor
*23 Crankshaft Position Sensor *24 Accelerator Pedal Position Sensor
*25 Atmospheric Pressure Sensor *26 Laminated EGR Pre-cooler
(w/ Laminated EGR Pre-cooler)



COMMON RAIL SYSTEM DESCRIPTION


a.

Common rail system:

The common rail system uses high-pressure fuel for improved fuel economy. This system also provides robust engine power while suppressing engine vibration and noise.

This system stores fuel in the common rail, which has been pressurized and supplied by the fuel supply pump assembly. By storing fuel at high-pressure, the common rail system can provide fuel at stable fuel injection pressures, regardless of engine speed or engine load.

The ECM provides an electric current to the solenoid valve in each injector assembly to regulate the fuel injection timing and volume. The ECM also monitors the internal fuel pressure of the common rail using the fuel pressure sensor. The ECM causes the fuel supply pump assembly to supply the fuel necessary to obtain the target fuel pressure.

In addition, this system uses a solenoid valve inside each injector assembly to open and close the fuel passages. Therefore, both fuel injection time and fuel injection volume can be precisely regulated by the ECM.

The common rail system allows a multi stage fuel injection process. In order to soften combustion shock, this system performs "pilot-injection" prior to the "main-injection". This helps to reduce engine vibration and noise.

A445186C01
1.896,0.865 1.458,0.365 true 4.052,0.896 3.635,0.365 true 6.188,0.906 6.5,0.375 true 4.927,3.802 5.354,3.583 true 1.104,4.219 1.542,4.49 true 1.271,6.271 1.688,6.042 true 5.75,6.531 6.021,6.76 true 1.292,0.26 1.604,0.458 0.313,0.198 10 false *2 3.469,0.271 3.781,0.469 0.313,0.198 10 false *1 6.552,0.26 6.865,0.458 0.313,0.198 10 false *3 1.083,1.979 1.396,2.177 0.313,0.198 10 false *4 0.948,3.208 1.26,3.406 0.313,0.198 10 false *5 1.604,3.219 1.917,3.417 0.313,0.198 10 false *6 4.74,3.729 5.052,3.927 0.313,0.198 10 false *7 0.948,4.135 1.26,4.333 0.313,0.198 10 false *8 1.094,6.24 1.406,6.438 0.313,0.198 10 false *9 6.042,6.781 6.354,6.979 0.313,0.198 10 false *10 4.99,7.5 5.302,7.698 0.313,0.198 10 false *11 4.969,8.229 5.281,8.427 0.313,0.198 10 false *12
*1 Common Rail Assembly *2 Fuel Pressure Sensor
*3 Pressure Discharge Valve *4 ECM
*5 Crankshaft Position Sensor *6 Camshaft Position Sensor
*7 Injector Assembly *8 Pre-stroke Control Valve
*9 Fuel Supply Pump Assembly *10 Pressurized Fuel Filter
*11 Fuel Filter Assembly *12 Fuel Tank Assembly
V100143

Fuel (High Pressure)
V100146

Fuel (Suction)
V100155

Fuel (Feed Pressure)
V100145

Fuel (Return)


HINT:

If there is a problem with a fuel return pipe, the engine startability may deteriorate, as bleeding air from the fuel system may not be able to be performed properly in certain instances (such as after replacing an injector assembly).



b.

Common rail system components:

Component Description
Common rail assembly Stores high-pressure fuel produced by supply pump
Fuel supply pump assembly
·

Operated by crankshaft via timing chain

·

Supplies high-pressure fuel to common rail


Injector assembly Injects fuel to combustion chamber based on signals from ECM
Fuel pressure sensor Monitors internal fuel pressure of common rail and sends signals to ECM
Pressure discharge valve Based on signals from ECM, opens valve when sudden deceleration occurs, or when ignition switch is off to prevent fuel pressure from becoming too high
Pre-stroke control valve Based on signals from ECM, adjusts fuel volume supplied to common rail and regulates internal fuel pressure


c.

Diagnostic trouble code (DTC) table for the common rail system:

HINT:

This table indicates typical DTC combinations for each malfunction occurrence.


Trouble Area Malfunction DTC No.
Injector assembly Open or short in injector circuit P009300*, P020112, P020114, P020212, P020214, P020312, P020314, P020412, P020414
Stuck open P009300
Stuck closed P030100, P030200, P030300, P030400
Fuel pressure sensor Open or short in fuel pressure sensor circuit or pressure sensor output fixed P008700, P107A11, P107A15, P107F62, P019011, P019015
Pressure discharge valve Open or short in pressure discharge valve circuit P008800*, P009300*, P122900*, P127112, P127114
Stuck open P009300
Stuck closed P008800*, P127114
Pre-stroke control valve Open or short in pre-stroke control valve circuit P062712, P062714, P122900, P008800*
Stuck open P008800*, P122900
Common rail system (Fuel system) Fuel leaks in high-pressure area P009300

*: There may be no DTC output depending on the condition of the malfunction.


d.

Diagnostic trouble code description for the common rail system:

DTC No. Description
P008700 Fuel pressure sensor output does not change
P008800 Internal fuel pressure too high (240000 kPag [2447 kgf/cm2, 34800 psi] or more)
P009300 Fuel leaks in high-pressure areas
P019011 Short in fuel pressure sensor circuit (Low output)
P019015 Open in fuel pressure sensor circuit (High output)
P020112 Short in No. 1 injector circuit (High output)
P020114 Open in No. 1 injector circuit (Low output)
P020212 Short in No. 2 injector circuit (High output)
P020214 Open in No. 2 injector circuit (Low output)
P020312 Short in No. 3 injector circuit (High output)
P020314 Open in No. 3 injector circuit (Low output)
P020412 Short in No. 4 injector circuit (High output)
P020414 Open in No. 4 injector circuit (Low output)
P030100 Cylinder 1 misfire detected
P030200 Cylinder 2 misfire detected
P030300 Cylinder 3 misfire detected
P030400 Cylinder 4 misfire detected
P062712 Short in pre-stroke control valve circuit (High output)
P062714 Open in pre-stroke control valve circuit (Low output)
P062D96 ECM internal error
P107A11 Short in fuel pressure sensor circuit (Low output)
P107A15 Open in fuel pressure sensor circuit (High output)
P107F62 Fuel pressure sensor circuit output fixed
P122900 Fuel over-feed
P127112 Short in pressure discharge valve circuit (High output)
P127114 Open in pressure discharge valve circuit (Low output)
P127273 Pressure discharge valve stuck close



FUEL SUPPLY PUMP OPERATION SYSTEM DESCRIPTION


a.

When the cam rotates the roller is pushed up, and in turn the plunger is pushed upward as well. When the plunger is not pushed up by the cam, it is pushed back down by the spring.

W123656C01
0.656,0.396 0.844,0.677 true 2.229,1.302 1.656,1.49 true 2.021,1.771 1.646,1.917 true 2.01,2.229 1.656,2.229 true 2.135,2.448 1.667,2.677 true 2.052,3.031 1.635,3.24 true 0.51,0.25 0.833,0.427 0.323,0.177 10 false *1 1.49,1.417 1.802,1.573 0.313,0.156 10 false *2 1.49,1.833 1.802,1.99 0.313,0.156 10 false *3 1.49,2.146 1.802,2.302 0.313,0.156 10 false *4 1.479,2.594 1.792,2.75 0.313,0.156 10 false *5 1.479,3.135 1.792,3.292 0.313,0.156 10 false *6
*1 Pre-stroke Control Valve *2 Plunger
*3 Spring *4 Shoe
*5 Roller *6 Double Cam



b.

The ECM controls the timing of the pre-stroke control valve opening to regulate the fuel quantity. Consequently, the fuel pressure in the common rail is controlled to the target injection pressure.


c.

The longer the pre-stroke control valve remains open, the quantity of pressure-fed strokes will decrease, as well as the fuel discharge quantity.


d.

Pumping will start when the fuel pressure has become higher than the common rail pressure.

W123658C01
3.302,0.552 3.438,0.271 true 3.417,0.083 3.729,0.24 0.313,0.156 10 false *a
*a Return Fuel - -



e.

The less time the pre-stroke control valve remains open, the quantity of pressure-fed strokes will increase, as well as the fuel discharge quantity.


f.

Pumping will start when the fuel pressure has become higher than the common rail pressure.

W123657