Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP (for 7GR-FKS(w/o Variable Flow Control Solenoid Valve)) › 2019.02–2019.06
RM35X0E _55 Steering _078944 POWER ASSIST SYSTEMS _0389111 VANE PUMP(for 7GR-FKS(w/o Variable Flow Control Solenoid Valve)) A

POWER ASSIST SYSTEMS  VANE PUMP(for 7GR-FKS(w/o Variable Flow Control Solenoid Valve))  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, do not overtighten it.

·

When installing the parts indicated by arrows, coat them with power steering fluid (See page Steering>POWER ASSIST SYSTEMS>VANE PUMP (for 7GR-FKS(w/o Variable Flow Control Solenoid Valve))>COMPONENTS).



PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 11209 2.REMOVE V-BANK COVER SUB-ASSEMBLY (w/ Cover)

Hide 53106B 3.REMOVE RADIATOR COVER SUB-ASSEMBLY

Hide 17751 4.REMOVE NO. 1 AIR CLEANER INLET

Hide 5.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 16361A 6.REMOVE FAN AND GENERATOR V BELT

Hide 7.DISCONNECT WIRE HARNESS BRACKET

a.
C412810

Disconnect the connector.


b.

Remove the bolt and disconnect the wire harness bracket.


Hide 44348D 8.DISCONNECT NO. 2 OIL RESERVOIR TO PUMP HOSE

a.
C412812

Slide the clip and disconnect the No. 2 oil reservoir to pump hose from the vane pump assembly.


b.

Drain the power steering fluid.


Hide 44410 9.DISCONNECT PRESSURE FEED TUBE ASSEMBLY

a.
C412814

Remove the union bolt and disconnect the pressure feed tube assembly.


b.

Remove the gasket.


Hide 44310 10.REMOVE VANE PUMP ASSEMBLY

a.
C412818

Remove the 2 bolts and vane pump assembly.