83150C
1.INSPECT INDICATOR ASSEMBLY
| *a | Rear Seat Belt Indicator (for LH) |
| *b | Rear Seat Belt Indicator (for Center) |
| *c | Rear Seat Belt Indicator (for RH) |
| *d | Component without harness connected
(Indicator Assembly) |
Apply battery voltage to the connector and check that the indicator assembly indicator illuminates.
| Measurement Condition | Specified Condition |
|---|---|
|
If the result is not as specified, replace the indicator assembly. |
|
| 1 (IG) - Battery positive (+)
9 (R2LM) - Battery negative (-) |
Rear seat belt indicator (for LH) illuminates. |
| 1 (IG) - Battery positive (+)
10 (R2CM) - Battery negative (-) |
Rear seat belt indicator (for Center) illuminates. |
| 1 (IG) - Battery positive (+)
11 (R2RI) - Battery negative (-) |
Rear seat belt indicator (for RH) illuminates. |