Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for Commuter, 3-Passenger Seat with 3-Point Type Seat Belt)
RM35X0E _58 Vehicle Interior _078602 SEAT BELT _0389155 REAR SEAT OUTER BELT ASSEMBLY(for Commuter, 3-Passenger Seat with 3-Point Type Seat Belt) A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Commuter, 3-Passenger Seat with 3-Point Type Seat Belt)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 72526J 2.REMOVE NO. 1 SEAT RECLINING ADJUSTER RELEASE HANDLE LH

Hide 72525N 3.REMOVE NO. 1 SEAT RECLINING ADJUSTER RELEASE HANDLE RH

HINT:

Use the same procedure described for the LH side.


Hide 71833S 5.REMOVE REAR NO. 1 SEAT RECLINING COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 73C73D 11.REMOVE REAR NO. 1 SEAT SHOULDER BELT COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 73C73E 13.REMOVE REAR NO. 2 SEAT SHOULDER BELT COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 73370 14.REMOVE REAR SEAT OUTER 3 POINT TYPE BELT ASSEMBLY LH (ANCHOR)

Hide 73350 15.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY (ANCHOR)

Hide 73360 16.REMOVE REAR SEAT OUTER 3 POINT TYPE BELT ASSEMBLY RH (ANCHOR)

Hide 17.REMOVE NO. 1 SEATBACK COVER WITH PAD LH

HINT:

Use the same procedure for the center seat.


a.
B540426

Remove the 2 hog rings.


b.

Pull out the 2 fasteners.

B540421


c.
B540422

Open the 2 fasteners.


d.
B540423

Detach the hook.


e.
B539377

Detach the hook.


f.
B537050C02
0,0 0,0 false
V113147

Remove in this Direction


Detach the claw and remove the 2 rear seat headrest supports as shown in the illustration.


g.
B536734C03
0,0 0,0 false
V113147

Remove in this Direction


Detach the guide.


h.
B536742

Detach the guide.


i.

Pass the rear seat outer 3 point type belt assembly LH through the hole of the No. 1 seatback cover with pad LH.


j.

Remove the No. 1 seatback cover with pad LH.

NOTICE:

Be careful not to damage the No. 1 seatback cover with pad LH.



Hide 18.REMOVE NO. 1 SEATBACK COVER WITH PAD RH

HINT:

Use the same procedure described for the LH side.


Hide 73C73F 20.REMOVE REAR NO. 3 SEAT SHOULDER BELT COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 73C73H 22.REMOVE REAR SEAT SHOULDER BELT HOLE COVER RH

HINT:

Use the same procedure described for the LH side.


Hide 73370 23.REMOVE REAR SEAT OUTER 3 POINT TYPE BELT ASSEMBLY LH

a.
B538315

Remove the 2 screws.


b.

Detach the guide and remove the bezel.


c.
B537040

Remove the bolt.


d.

Detach the guide and remove the rear seat outer 3 point type belt assembly LH.


Hide 73350 24.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

HINT:

Use the same procedure described for the LH side.


Hide 73360 25.REMOVE REAR SEAT OUTER 3 POINT TYPE BELT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.