Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt)
RM35X0E _58 Vehicle Interior _078602 SEAT BELT _0390032 REAR SEAT OUTER BELT ASSEMBLY(for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt) A

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Commuter, Single-Passenger Seat with 2-Point Type Seat Belt)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

The procedure listed below is a representative example.

·

Use the same procedure for all rows, unless otherwise specified.



PROCEDURE

Hide 72525R 4.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH (w/ Seatback Board)

Hide 73330L 6.REMOVE REAR 1 PERSON SEAT LAP TYPE BELT ASSEMBLY

a.
B541381

Remove the bolt and rear 1 person seat lap type belt assembly.