Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ EGR Cooler)
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0388653 ECD SYSTEM(w/ EGR Cooler) C

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ EGR Cooler)  U012987  Lost Communication With Brake System Control Module Missing Message  


DESCRIPTION

The ECM and brake system control module send and receive signals via CAN communication.

If a communication error occurs between the ECM and brake system control module, the ECM stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
U012987 Lost Communication With Brake System Control Module Missing Message There is no communication between the ECM and brake system control module (1 trip detection logic).
·

ECM

·

Brake System Control Module

·

CAN Communication System


Dose not come on DTC stored SAE Code: U0129

CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
U012987 Ignition switch ON for 5 seconds or more

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT (DTC U012987)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Trouble Codes.


e.

Read the DTCs using the GTS.

Powertrain > Engine > Trouble Codes
50001 372

Result:
Result Proceed to
DTC U012987 is not output A
DTC U012987 is output B



A

B