Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/ Exhaust Gas Temperature Sensor for EGR) › 2019.06–2021.07
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0395991 ECD SYSTEM(w/ Exhaust Gas Temperature Sensor for EGR) C

1GD-FTV ENGINE CONTROL  ECD SYSTEM(w/ Exhaust Gas Temperature Sensor for EGR)  U010E87  Lost Communication with Reductant Control Module Missing Message  


DESCRIPTION

The ECM sends and receives data to and from the urea pump control ECU via local CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
U010E87 Lost Communication with Reductant Control Module Missing Message Communication stops between the ECM and the urea pump control ECU for 1.6 second or more (1 trip detection logic).
·

ECM

·

Urea pump control ECU

·

CAN communication system


Class A DTC stored SAE Code: U010E

MONITOR DESCRIPTION

The ECM stores a DTC when a communication malfunction occurs between the ECM and urea pump control ECU.

CONFIRMATION DRIVING PATTERN

DTC No. DTC Detection Drive Pattern
U010E87 1.6 seconds or more after turning the engine switch on (IG).

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses of circuits related to this system before performing the following inspection procedure.


HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK DTC OUTPUT (DTC U010E87)
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the GTS on.


c.

According to the display on the GTS, select "Health Check".


d.

Check for currently output system DTCs.

Result:
Result Proceed to
DTC U010E87 is not output A
DTC U010E87 is output B




A

B