Home › Vehicle Interior › HEATING / AIR CONDITIONING › ION GENERATOR (for Rear) › from 2019.06
RM35X0E _58 Vehicle Interior _079316 HEATING / AIR CONDITIONING _0396517 ION GENERATOR(for Rear) A

HEATING / AIR CONDITIONING  ION GENERATOR(for Rear)  REMOVAL  


PROCEDURE

Hide 87202F 2.REMOVE REAR AIR DUCT SUB-ASSEMBLY

a.

for Rear Air Conditioning:

i.

Detach the clip.


ii.
E421492

Detach the claw and remove the rear air duct sub-assembly.



b.

for Rear Cooler:

i.
E421489

Detach the clip.


ii.

Detach the claw and remove the rear air duct sub-assembly.



Hide 3.REMOVE NO. 2 ION GENERATOR SUB-ASSEMBLY

a.
E421493C01
2.927,2.844 2.927,2.313 2.927,2.313 3.115,2.313 true 3.135,2.219 3.365,2.406 0.229,0.188 10 true *1
*1 Ground Wire
V100135

Screw
V100136

Connector


for Rear Air Conditioning:

i.

Disconnect the connector from the No. 2 ion generator sub-assembly.


ii.

Remove the 3 screws and ground wire.


iii.

Detach the guide and remove the No. 2 ion generator sub-assembly.



b.
E421490C01
2.844,2.833 2.844,2.49 2.844,2.49 3.031,2.49 true 3.042,2.375 3.354,2.573 0.313,0.198 10 true *1
*1 Ground Wire
V100135

Screw
V100136

Connector


for Rear Cooler:

i.

Disconnect the connector from the No. 2 ion generator sub-assembly.


ii.

Remove the 3 screws and ground wire.


iii.

Detach the guide and remove the No. 2 ion generator sub-assembly.