Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR › from 2019.06
RM35X0E _59 Vehicle Exterior _079320 WIPER / WASHER _0385303 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 67938A 1.REMOVE BACK DOOR SIDE GARNISH LH (for Wagon)

Hide 67937B 2.REMOVE BACK DOOR SIDE GARNISH RH (for Wagon)

HINT:

Use the same procedure described for the LH side.


Hide 67760A 3.REMOVE BACK DOOR UPPER TRIM BOARD ASSEMBLY (for Wagon)

Hide 67760A 4.REMOVE BACK DOOR UPPER TRIM BOARD ASSEMBLY (except Wagon, for Regular)

Hide 67760A 5.REMOVE BACK DOOR UPPER TRIM BOARD ASSEMBLY (except Wagon, for Large)

Hide 6.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
B538402C01
0,0 0,0 false
V113147

Remove in this Direction


Slide the rear wiper arm head cap as shown in the illustration to detach the claw.


b.
B538403C01
0,0 0,0 false
V113147

Remove in this Direction


Move the rear wiper arm head cap in the direction indicated by the arrow shown in the illustration and detach the claw.


c.
B538404

Remove the nut and rear wiper arm and blade assembly.


Hide 85110R 7.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
B538405C01
0,0 0,0 false
V100135

Bolt
V100136

Connector


Disconnect the connector.


b.

Loosen the 3 bolts and disconnect the rear wiper motor assembly.

NOTICE:

Do not subject the rear wiper motor assembly to strong impacts or force, and do not drop it.



c.
B538406

Detach the clamp and remove the rear wiper motor assembly.


Hide 85143R 8.REMOVE REAR WIPER MOTOR GROMMET

a.
B538407

Remove the rear wiper motor grommet.