Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER CONTROL RELAY › 2019.06–2021.07
RM35X0E _59 Vehicle Exterior _079320 WIPER / WASHER _0396933 HEADLIGHT CLEANER CONTROL RELAY A

WIPER / WASHER  HEADLIGHT CLEANER CONTROL RELAY  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight cleaner control relay removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Front bumper assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system (Click here)

PROCEDURE

Hide 85942 2.REMOVE HEADLIGHT CLEANER CONTROL RELAY

a.
B545073C01
0,0 0,0 false
V113147

Remove in this Direction


Disconnect the connector.


b.

Detach the claw and remove the headlight cleaner control relay as shown in the illustration.