Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH (except Wagon) › from 2019.06
RM35X0E _59 Vehicle Exterior _079322 EXTERIOR PANELS / TRIM _0397101 BACK DOOR OUTSIDE GARNISH(except Wagon) A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH(except Wagon)  REMOVAL  


PROCEDURE

Hide 69298 1.REMOVE BACK DOOR INSIDE HANDLE COVER (w/ Handle, w/ Cover)

Hide 69291 2.REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Handle)

Hide 69783B 3.REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Handle, w/o illumination)

Hide 69783B 4.REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Handle, w/ illumination)

Hide 67961A 5.REMOVE BACK DOOR PULL STRAP

Hide 67751 6.REMOVE BACK DOOR TRIM BOARD

Hide 67290 7.REMOVE BACK DOOR DAMPER ASSEMBLY (w/ Damper)

Hide 76801 8.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.
B525688C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the back door outside garnish sub-assembly.


b.

Remove the 2 bolts and 5 nuts.

B525692C02
0,0 0,0 false
V100135

Bolt
V100136

Nut



c.
B525689C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover D, pull toward the rear of the vehicle and detach the clip.


d.
B525690C01
0,0 0,0 false
V113147

Remove in this Direction


Using moulding remover D, pull toward the rear of the vehicle and detach the clip.


e.
B525691C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Placing your hand in the gap, pull the back door outside garnish sub-assembly and detach the clip as shown in the illustration.