A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
76801
1.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
|
Install in this Direction |
Attach the clip and install the back door outside garnish sub-assembly.
Remove the protective tape.
Install the 2 bolts and 5 nuts.
| *a | Nut A | - | - |
|
Bolt |
|
Nut |
67290
2.INSTALL BACK DOOR DAMPER ASSEMBLY (w/ Damper)
67751
3.INSTALL BACK DOOR TRIM BOARD
67961A
4.INSTALL BACK DOOR PULL STRAP
69783B
5.INSTALL BACK DOOR INSIDE HANDLE BEZEL (w/ Handle, w/ illumination)
69783B
6.INSTALL BACK DOOR INSIDE HANDLE BEZEL (w/ Handle, w/o illumination)
69291
7.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Handle)
69298
8.INSTALL BACK DOOR INSIDE HANDLE COVER (w/ Handle, w/ Cover)