Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › PARTICULATE MATTER SENSOR › from 2019.06
RM35X0E _51 Engine / Hybrid System _078856 1GD-FTV ENGINE CONTROL _0397338 PARTICULATE MATTER SENSOR A

1GD-FTV ENGINE CONTROL  PARTICULATE MATTER SENSOR  REMOVAL  


PROCEDURE

Hide 894A0 1.REMOVE PARTICULATE MATTER SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A448427

Disconnect the connector from the particulate matter sensor.


b.
A448428

Detach the 3 clamps.


c.
A448429

Remove the 2 bolts and sensor bracket.


d.
A448430N01
1.115,1.563 1.323,1.563 1.323,1.563 1.635,0.99 true 0.823,1.479 1.198,1.708 0.375,0.229 10 true SST

Using SST, remove the particulate matter sensor.

SST
09224-00030  


e.
A448431

Remove the 2 nuts and remove the particulate matter sensor from the sensor bracket.