Home › Vehicle Exterior › DOOR / HATCH › POWER SLIDE DOOR TOUCH SENSOR (for Wagon) › from 2019.06
RM35X0E _59 Vehicle Exterior _078503 DOOR / HATCH _0397543 POWER SLIDE DOOR TOUCH SENSOR(for Wagon) A

DOOR / HATCH  POWER SLIDE DOOR TOUCH SENSOR(for Wagon)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

Use the same procedure described for the RH side.



PROCEDURE

Hide 84250B 1.INSTALL POWER SLIDE DOOR SENSOR ASSEMBLY RH

a.
B539682

Attach the claw and install the 5 screw grommets.


b.
B539688C01
0,0 0,0 false
V113147

Install in this Direction


Insert the power slide door sensor assembly RH connector to the service hole on the slide door panel.


c.

Temporarily install the power slide door sensor assembly RH with the temporary screw.


d.
B551467C02
0.927,2.333 1.156,2.531 0.229,0.198 10 true (1) 0.948,2.823 1.177,3.021 0.229,0.198 10 true (2)
V100135

Screw
V100136

Bolt


Install the 3 bolts in the order shown in the illustration.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


e.

Install the 5 screws.


f.
B539679

Connect the connector.


Hide 67851E 2.INSTALL SLIDE DOOR SERVICE HOLE COVER RH

Hide 67680B 3.INSTALL SLIDE DOOR TRIM BOARD ASSEMBLY RH

Hide 81380D 4.INSTALL STEP LIGHT ASSEMBLY

Hide 67487A 5.INSTALL REAR DOOR REAR GUIDE BRACKET GARNISH RH

Hide 67667A 6.INSTALL SLIDE DOOR WINDOW GARNISH RH

Hide 67692B 7.INSTALL SLIDE DOOR TRIM UPPER COVER RH

Hide 65988A 8.INSTALL SUNSHADE HOOK (w/ Sunshade)