Home › General › MAINTENANCE › REAR TURN SIGNAL LIGHT BULB › from 2019.06
RM35X0E _V1 General _078672 MAINTENANCE _0384283 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E413335C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear turn signal light bulb to the bulb socket.


b.

for Bulb Type:

i.
E413339C01
1.396,1.021 1.063,0.563 true 0.875,0.26 1.167,0.469 true 3.073,1.083 3.01,0.76 true 1.375,1.031 1.688,1.188 0.313,0.156 10 false *a 0.677,0.156 0.865,0.323 0.188,0.167 10 true *b 3,1.104 3.188,1.281 0.188,0.177 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Turn in this Direction


Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark to connect the bulb socket.



c.

for LED Type:

i.
B544900C01
0.771,1.302 0.635,1.021 true 0.365,1.229 0.51,1.104 true 2.115,0.781 2.052,0.458 true 0.698,1.302 0.885,1.49 0.188,0.188 10 true *a 0.188,1.229 0.375,1.396 0.188,0.167 10 true *b 1.938,0.281 2.125,0.458 0.188,0.177 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Turn in this Direction


Attach the clamp.


ii.

Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark to connect the bulb socket.



Hide 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.

for Bulb Type:

i.
E413223C01
0,0 0,0 false
V113147

Install in this Direction
V100155

Protective Tape


Slide the rear combination light assembly LH towards the vehicle front to attach the pin.


ii.
B544931C02
0,0 0,0 false
V100155

Protective Tape


Install the 3 screws.


iii.

Remove the protective tape.



b.

for LED Type:

i.
B544599C02
0,0 0,0 false
V113147

Install in this Direction


Slide the rear combination light assembly LH towards the vehicle front to attach the pin.


ii.
B544597C02
0,0 0,0 false
V100155

Protective Tape


Install the 2 screws.


iii.

Remove the protective tape.



Hide 81498 3.INSTALL REAR COMBINATION LIGHT COVER LH (for LED Type)

Hide 81497A 4.INSTALL REAR UPPER COMBINATION LIGHT COVER RH (for LED Type)