Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH (for Wagon) › from 2019.06
RM35X0E _58 Vehicle Interior _078381 LIGHTING (INT) _0398445 BACK DOOR COURTESY SWITCH(for Wagon) A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH(for Wagon)  INSTALLATION  


PROCEDURE

Hide 69350P 1.INSTALL BACK DOOR LOCK ASSEMBLY WITH COURTESY LIGHT SWITCH

a.

Apply MP grease to the sliding parts of the back door lock assembly with courtesy light switch.


b.
B538419

Install the back door lock assembly with courtesy light switch with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


c.
B538418

Attach the cable clamp.


d.

Connect the connector.


Hide 69690 2.INSTALL BACK DOOR REMOTE CONTROL ASSEMBLY

a.

Apply MP grease to the sliding areas of the back door remote control assembly.


b.
B538414N01
0.635,0.448 0.844,0.646 0.208,0.198 10 true (1) 1.333,0.177 1.542,0.375 0.208,0.198 10 true (2)

Attach the guide.


c.

Install the back door remote control assembly with the 4 screws in the order shown in the illustration.


d.
B555249

Connect the connector.


e.
B555248

Attach the clamp and connect the back door lock cable.


f.
B538443C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Connect the back door lock open link in the direction indicated by the arrow (1) in the illustration.


g.

Attach the snap in the direction indicated by the arrow (2) in the illustration.


Hide 67751 3.INSTALL BACK DOOR TRIM BOARD

Hide 67961A 4.INSTALL BACK DOOR PULL STRAP

Hide 69783B 5.INSTALL BACK DOOR INSIDE HANDLE BEZEL (w/ Handle)

Hide 69291 6.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY (w/ Handle)

Hide 67938A 7.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 8.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.