Home › Vehicle Interior › SEAT › OCCUPANT DETECTION SENSOR (for 60/40 Split Seat Type 60 Side) › from 2019.06
RM35X0E _58 Vehicle Interior _078601 SEAT _0400052 OCCUPANT DETECTION SENSOR(for 60/40 Split Seat Type 60 Side) A

SEAT  OCCUPANT DETECTION SENSOR(for 60/40 Split Seat Type 60 Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 79335B 1.INSTALL NO. 3 SEAT CUSHION PAD RH (OCCUPANT DETECTION SENSOR)

HINT:

When installing a No. 3 seat cushion cover sub-assembly RH, refer to the Precaution section in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Separate Seat Type)>PRECAUTION


a.
B547523C01
1.865,3.771 2.167,3.219 false 2.198,3.073 2.51,3.229 0.313,0.156 10 false *a 1.01,1.031 1.229,1.229 0.219,0.198 10 true (1) 1.375,1.031 1.594,1.229 0.219,0.198 10 true (2) 1.906,0.646 2.125,0.844 0.219,0.198 10 true (6) 1.927,1.125 2.146,1.323 0.219,0.198 10 true (7) 1.969,1.583 2.188,1.781 0.219,0.198 10 true (8) 0.479,1.573 0.698,1.771 0.219,0.198 10 true (5) 0.49,1.135 0.708,1.333 0.219,0.198 10 true (4) 0.5,0.615 0.719,0.813 0.219,0.198 10 true (3)
*a Hog Ring Pliers


Using hog ring pliers, install the new 8 hog rings in the order indicated in the illustration.


b.
B552176C02
1.76,2.938 2,2.521 false 1.927,2.354 2.24,2.552 0.313,0.198 10 false *a
*a Hog Ring Pliers


Using hog ring pliers, install the No. 3 seat cushion cover sub-assembly RH to the No. 3 seat cushion pad RH (occupant detection sensor) with the new hog ring.

NOTICE:
·

Be careful not to damage the No. 3 seat cushion cover sub-assembly RH.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the No. 3 seat cushion cover sub-assembly RH.




Hide 2.INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

Hide 72057H 3.INSTALL REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH

Hide 72345W 4.INSTALL NO. 3 SEAT STAND FRAME CAP LH

Hide 71H75S 6.INSTALL RH SEAT RECLINING ADJUSTER INSIDE COVER

Hide 71834P 7.INSTALL RH SEAT REAR NO. 3 SEAT RECLINING COVER

Hide 73350 8.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY (w/ Center Headrest)

Hide 71848V 9.INSTALL NO. 3 SEAT ADJUSTER COVER CAP RH (w/ Center Headrest)

Hide 79076P 10.INSTALL NO. 3 SEAT LEG COVER SUB-ASSEMBLY RH

Hide 72215C 11.INSTALL NO. 3 SEAT TRACK HANDLE CONTROL LEVER RH

Hide 72525Q 12.INSTALL NO. 3 SEAT RECLINING ADJUSTER RELEASE HANDLE RH

Hide 72057E 13.INSTALL REAR NO. 1 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

Hide 72345V 14.INSTALL NO. 4 SEAT STAND FRAME CAP RH

Hide 73315B 15.INSTALL REAR NO. 3 SEAT INNER BELT COVER RH

Hide 17.INSPECT SEAT BELT WARNING SYSTEM