2007-2013 Highlander Kluger · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface, wash off and remove it completely.


3. DISCONNECT REAR FLEXIBLE HOSE

  1. C167068
    Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly.


4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

  1. C166430E01
    Hold the 2 rear disc brake cylinder slide pins, and remove the 2 bolts and rear disc brake cylinder assembly.

← COMPONENTS (from Jul 2010)DISASSEMBLY (from May 2007) →