2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

No Sound can be Heard from Speakers

Circuit diagnosis · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK RADIO RECEIVER
  1. Check radio receiver setting.

    1. Check that the volume is not set to "0".

    2. Check that "MUTE" is off.

      OK:
      The volume is not set to "0" and "MUTE" is off.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END


← No Sound can be Heard from Speakers (Aug 2008 – Jun 2010)Sound Quality is Bad Only when CD is Played (Volume is Too Low) (May 2007 – Jul 2008) →