2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

CD Sound Skips

Circuit diagnosis · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

INSPECTION PROCEDURE


1. CHECK CD

  1. I100151
    Check the CD.

    OK:
    The CD is clean.

    HINT:
    If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN CD
OK


2. CHECK CD

  1. I100152
    Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CHANGE DISC
OK


3. CHECK OPERATION USING ANOTHER CD
  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



NG
Go to step 4
OK

END

4. CHECK RADIO RECEIVER
  1. Check the radio receiver installation condition.

    1. Check that the radio receiver is properly installed.

      OK:
      Radio receiver is properly installed.



NG
REINSTALL RADIO RECEIVER PROPERLY
OK

REPLACE RADIO RECEIVER (Click here)


← CD Sound Skips (Aug 2008 – Jun 2010)Radio Broadcast cannot be Received or Poor Reception (May 2007 – Jul 2008) →