2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from May 2007


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the intelligent tester on.

  4. Select the following menu items: Body Electrical / Trouble Codes.

  5. Read the DTCs.

    HINT:
    Refer to the the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Turn the intelligent tester on.

  4. Select the following menu items: Body Electrical / Trouble Codes.

  5. Erase the DTCs.

    HINT:
    Refer to the the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from May 2007)FAIL-SAFE CHART (from May 2007) →