2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Panel Switches do not Function

Circuit diagnosis · Vehicles built Jul 2010 – Jun 2012

Versions by build date: Jul 2010 – Jun 2012 from Jul 2012

INSPECTION PROCEDURE


1. CHECK PANEL SWITCH
  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2. CHECK PANEL SWITCH (OPERATION CHECK)
E176522E11
  1. Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The switch name and status are correctly displayed as operated.

Text in Illustration 
*a
Name of switch being pushed
*b
Rotary switch name
*c
Rotary switch direction


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)


← Display does not Dim when Light Control Switch is Turned ON (from Jul 2012)Panel Switches do not Function (from Jul 2012) →