Route cannot be Calculated
Circuit diagnosis · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK MAP DISC |
 |
- Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on the map disc.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. SET DESTINATION |
 |
Set another destination and check if the system can calculate the route correctly.
- OK:
- Route can be correctly calculated.
|
NG |
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
|