Cellular Phone cannot Send/Receive
Circuit diagnosis · Vehicles built from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK "Bluetooth" SETTINGS |
Check if the "Bluetooth" settings are correct.
- OK:
- "Bluetooth" settings are correct.
|
|
||||
| OK | |
| 2. CHECK CELLULAR PHONE |
Check if the cellular phone is "Bluetooth" compatible.
- HINT:
- Some versions of "Bluetooth" compatible cellular phones may not function.
- OK:
- Phone is "Bluetooth" compatible.
|
|
||||
| OK | |
| 3. CHECK SETTINGS |
Check if the cellular phone functions.
- HINT:
- The cellular phone is unable to call when any of the following conditions are met:
- The cellular phone is locked.
- The directory is being transferred.
- The line is crossed.
- Outside service range.
- The power is off.
- The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).
- The cellular phone is locked.
- OK:
- None of the above conditions exist.
|
|
||||
| OK | |
| 4. CHECK CELLULAR PHONE |
Check if the cellular phone can make a call.
- HINT:
- When the battery is low, calls cannot be made or received.
- OK:
- Cellular phone can make a call.
|
|
||||
| OK | |
| 5. CHECK RECEPTION |
Set the cellular phone so that it can receive calls.
Place the cellular phone close to the radio receiver.
Check if the cellular phone has reception according to the radio receiver.
- OK:
- Cellular phone has reception.
|
|
||||
| OK | ||
| ||
