2007-2013 Highlander Kluger · Service Manual RESTRAINTS

ON-VEHICLE INSPECTION

Inspection · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT STEERING PAD (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. C166979
    With the steering pad installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad with a new one:
    1. Cuts, minute cracks or marked discoloration on the steering pad top surface or grooves.


INSPECT STEERING PAD (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).

  1. C166980E01
    With the steering pad removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the steering pad or steering wheel assembly with a new one:
    1. Cuts, minute cracks or marked discoloration on the steering pad top surface or grooves.
    2. Cracks or other damage to the connectors.
    3. Deformation of the steering wheel assembly.
    4. Deformation of the horn button contact plate of the steering pad.
    5. There should be no interference between the steering pad and steering wheel assembly, and the clearance should be uniform all the way around when the new steering pad is installed on the steering wheel assembly.

    CAUTION:
    Be sure to follow the correct removal and installation procedure.

← COMPONENTS (from May 2007)ON-VEHICLE INSPECTION (Aug 2008 – Jun 2010) →