2007-2013 Highlander Kluger · Service Manual RESTRAINTS

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. With the curtain shield airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the front pillar garnish or roof headlining assembly with a new one:


    1. Cuts, minute cracks or marked discoloration on the front pillar garnish or roof headlining assembly around the curtain shield airbag assembly.

      C168038


INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).

  1. With the roof headlining assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the curtain shield airbag assembly with a new one:

    1. Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.

    2. Cracks or other damage to the connectors.

      C166975

      CAUTION:
      Be sure to follow the correct removal and installation procedures.

← ON-VEHICLE INSPECTION (Aug 2008 – Jun 2010)REMOVAL (May 2007 – Jul 2008) →