2007-2013 Highlander Kluger · Service Manual RESTRAINTS

ON-VEHICLE INSPECTION

Inspection · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).


INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).


INSPECT CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
  1. Replace the center airbag sensor assembly.

    CAUTION:
    Be sure to follow the correct removal and installation procedure.

    HINT:
    The center airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to an impact.

← ON-VEHICLE INSPECTION (May 2007 – Jul 2008)ON-VEHICLE INSPECTION (from Jul 2010) →