2007-2013 Highlander Kluger · Service Manual RESTRAINTS

ON-VEHICLE INSPECTION

Inspection · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).


INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).

  1. Even if an airbag was not deployed, check if there is any damage to the seat position sensor.
    If there are any defects as mentioned below, replace the seat position sensor with a new one:

    1. Cracks, dents or chips on the sensor housing.
    2. Cracks or other damage to the connector.

    CAUTION:
    Be sure to follow the correct removal and installation procedures.

← COMPONENTS (from May 2007)ON-VEHICLE INSPECTION (Aug 2008 – Jun 2010) →