2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY

B065478E13
  1. Check operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      Operation Direction
      Battery positive (+) → 1 (H)
      Battery negative (-) → 2 (R)
      Clockwise
      Battery positive (+) → 2 (R)
      Battery negative (-) → 1 (H)
      Counterclockwise

      If the result is not as specified, replace the lumbar support adjuster assembly.

← DISASSEMBLY (from May 2007)REASSEMBLY (from May 2007) →