2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FRONT POWER SEAT SWITCH LH (for LHD)

B105970E18
  1. Measure the resistance between the terminals when each switch is operated.

    Standard resistance:
    Slide switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 9 (SLDF)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    OFF
    Below 1 Ω
    4 (E) - 9 (SLDF)
    OFF
    Below 1 Ω
    1 (B) - 6 (SLDR)
    REAR
    Below 1 Ω
    4 (E) - 9 (SLDF)
    REAR
    Below 1 Ω
    Front vertical switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 10 (FUP)
    UP
    Below 1 Ω
    4 (E) - 5 (FDWN)
    UP
    Below 1 Ω
    4 (E) - 5 (FDWN)
    OFF
    Below 1 Ω
    4 (E) - 10 (FUP)
    OFF
    Below 1 Ω
    1 (B) - 5 (FDWN)
    DOWN
    Below 1 Ω
    4 (E) - 10 (FUP)
    DOWN
    Below 1 Ω
    Lifter switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 7 (LUP)
    UP
    Below 1 Ω
    4 (E) - 8 (LDWN)
    UP
    Below 1 Ω
    4 (E) - 7 (LUP)
    OFF
    Below 1 Ω
    4 (E) - 8 (LDWN)
    OFF
    Below 1 Ω
    1 (B) - 8 (LDWN)
    DOWN
    Below 1 Ω
    4 (E) - 7 (LUP)
    DOWN
    Below 1 Ω
    Reclining switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 3 (RCLF)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    OFF
    Below 1 Ω
    3 (RCLF) - 4 (E)
    OFF
    Below 1 Ω
    1 (B) - 2 (RCLR)
    REAR
    Below 1 Ω
    3 (RCLF) - 4 (E)
    REAR
    Below 1 Ω

    If the result is not as specified, replace the switch.


INSPECT FRONT POWER SEAT SWITCH RH (for RHD)

B105970E19
  1. Measure the resistance between the terminals when each switch is operated.

    Standard resistance:
    Slide switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 9 (SLDF)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    OFF
    Below 1 Ω
    4 (E) - 9 (SLDF)
    OFF
    Below 1 Ω
    1 (B) - 6 (SLDR)
    REAR
    Below 1 Ω
    4 (E) - 9 (SLDF)
    REAR
    Below 1 Ω
    Front vertical switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 5 (FUP)
    UP
    Below 1 Ω
    4 (E) - 10 (FDWN)
    UP
    Below 1 Ω
    4 (E) - 10 (FDWN)
    OFF
    Below 1 Ω
    4 (E) - 5 (FUP)
    OFF
    Below 1 Ω
    1 (B) - 10 (FDWN)
    DOWN
    Below 1 Ω
    4 (E) - 5 (FUP)
    DOWN
    Below 1 Ω
    Lifter switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 8 (LUP)
    UP
    Below 1 Ω
    4 (E) - 7 (LDWN)
    UP
    Below 1 Ω
    4 (E) - 8 (LUP)
    OFF
    Below 1 Ω
    4 (E) - 7 (LDWN)
    OFF
    Below 1 Ω
    1 (B) - 7 (LDWN)
    DOWN
    Below 1 Ω
    4 (E) - 8 (LUP)
    DOWN
    Below 1 Ω
    Reclining switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 3 (RCLF)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    OFF
    Below 1 Ω
    3 (RCLF) - 4 (E)
    OFF
    Below 1 Ω
    1 (B) - 2 (RCLR)
    REAR
    Below 1 Ω
    3 (RCLF) - 4 (E)
    REAR
    Below 1 Ω

    If the result is not as specified, replace the switch.


INSPECT FRONT POWER SEAT SWITCH (PASSENGER SIDE)

  1. B129637E02
    Measure the resistance between the terminals when each switch is operated.

    Standard resistance:
    Slide switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 9 (SLDF)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    FRONT
    Below 1 Ω
    4 (E) - 6 (SLDR)
    OFF
    Below 1 Ω
    4 (E) - 9 (SLDF)
    OFF
    Below 1 Ω
    1 (B) - 6 (SLDR)
    REAR
    Below 1 Ω
    4 (E) - 9 (SLDF)
    REAR
    Below 1 Ω
    Reclining switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 3 (RCLF)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    FRONT
    Below 1 Ω
    2 (RCLR) - 4 (E)
    OFF
    Below 1 Ω
    3 (RCLF) - 4 (E)
    OFF
    Below 1 Ω
    1 (B) - 2 (RCLR)
    REAR
    Below 1 Ω
    3 (RCLF) - 4 (E)
    REAR
    Below 1 Ω

    If the result is not as specified, replace the switch.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →