TERMINALS OF ECM
System information · Vehicles built May 2007 – Jun 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| ECM |


- HINT:
- Each ECM terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Terminal No. (Symbols)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".
- Use the illustration above as a reference for the ECM terminals.
| Terminals No. (Symbols) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| D32-21 (D) - B3-1 (E1) |
BR - W-B |
D shift position switch signal |
Ignition switch on (IG) and shift lever D and S position |
11 to 14 V |
| Ignition switch on (IG) and shift lever except D and S position |
Below 1 V |
|||
| D32-11 (R) - B3-1 (E1) |
G - W-B |
R shift position switch signal |
Ignition switch on (IG) and shift lever R position |
11 to 14 V |
| Ignition switch on (IG) and shift lever except R position |
Below 1 V |
|||
| D32-8 (SPD) - B3-1 (E1) |
LG - W-B |
Speed signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (See waveform 8) |
| D31-15 (STP) - B3-1 (E1) |
R - W-B |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| Brake pedal is released |
Below 1.5 V |
|||
| D32-5 (SFTD) - B3-1 (E1) |
BR - W-B |
Down shift switch signal |
Ignition switch on (IG) and shift lever S position |
11 to 14 V |
| Ignition switch on (IG) and shift lever "-" position (Down shift) |
Below 1 V |
|||
| D32-6 (SFTU) - B3-1 (E1) |
V - W-B |
Up shift switch signal |
Ignition switch on (IG) and shift lever S position |
11 to 14 V |
| Ignition switch on (IG) and shift lever "+" position (Up shift) |
Below 1 V |
|||
| D32-20 (S) - B3-1 (E1) |
SB - W-B |
S shift position switch signal |
Ignition switch on (IG) and shift lever S position |
11 to 14 V |
| Ignition switch on (IG) and shift lever except S position |
Below 1 V |
|||
| D32-23 (P) - B3-1 (E1) |
LG - W-B |
Park position switch signal |
Ignition switch on (IG) and shift lever P position |
11 to 14 V |
| Ignition switch on (IG) and shift lever except P position |
Below 1 V |
|||
| D32-22 (N) - B3-1 (E1) |
R - W-B |
Neutral position switch signal |
Ignition switch on (IG) and shift lever N position |
11 to 14 V |
| Ignition switch on (IG) and shift lever except N position |
Below 1 V |
|||
| B2-8 (NSW (STAR)) - B3-1 (E1) |
GR - W-B |
Park neutral switch signal |
Ignition switch on (IG) and shift lever P and N position |
Below 1 V |
| Ignition switch on (IG) and shift lever except P and N position |
11 to 14 V |
|||
| B2-11 (DSL) - B3-1 (E1) |
B - W-B |
DSL solenoid signal |
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF) |
Pulse generation (See waveform 2) |
| B2-9 (SR) - B3-1 (E1) |
Y - W-B |
SR solenoid signal |
Ignition switch on (IG) |
Below 1 V |
| 3rd, 4th or 5th gear |
11 to 14 V |
|||
| 1st or 2nd gear |
Below 1 V |
|||
| B2-10 (S4) - B3-1 (E1) |
L - W-B |
S4 solenoid signal |
Ignition switch on (IG) |
Below 1 V |
| 5th gear |
11 to 14 V |
|||
| Except 5th gear |
Below 1 V |
|||
| B2-17 (SL3+) - B2-16 (SL3-) |
W - G |
SL3 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 3) |
| B2-15 (SL2+) - B2-14 (SL2-) |
Y - L |
SL2 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 4) |
| B2-19 (SL1+) - B2-18 (SL1-) |
G - GR |
SL1 solenoid signal |
Engine idle speed |
Pulse generation (See waveform 5) |
| B2-34 (NC+) - B2-26 (NC-) |
R - BR |
Speed sensor (NC) signal |
Vehicle speed 30 km/h (19 mph): (3rd gear) Engine speed 1400 rpm |
Pulse generation (See waveform 6) |
| B2-35 (NT+) - B2-27 (NT-) |
W - L |
Speed sensor (NT) signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (See waveform 7) |
| B2-13 (SLT+) - B2-12 (SLT-) |
R - G |
SLT solenoid signal |
Engine idle speed |
Pulse generation (See waveform 1) |
| B2-24 (THO1) - B1-28 (E2) |
P - BR |
ATF temperature sensor signal |
ATF temperature: 115°C (239°F) or more |
Below 1.5 V |
| D32-27 (SNW1) - B3-1 (E1) |
V - W-B |
ECT SNOW switch signal |
Ignition switch on (IG) |
11 to 14 V |
| Ignition switch on (IG) and press continuously pattern select switch (ect snow switch) |
Below 1 V |
Waveform 1

Reference: Terminal
SLT+ - SLT-
Tool setting
5 V/DIV, 1 ms/DIV
Vehicle condition
Engine idle speed
Waveform 2

Reference: Terminal
DSL - E1
Tool setting
10 V/DIV, 100 ms/DIV
Vehicle condition
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
Waveform 3

Reference: Terminal
SL3+ - SL3-
Tool setting
5 V/DIV, 1 ms/DIV
Vehicle condition
Engine idle speed
Waveform 4

Reference: Terminal
SL2+ - SL2-
Tool setting
5 V/DIV, 1 ms/DIV
Vehicle condition
Engine idle speed
Waveform 5

Reference: Terminal
SL1+ - SL1-
Tool setting
5 V/DIV, 1 ms/DIV
Vehicle condition
Engine idle speed
Waveform 6

Reference: Terminal
NC+ - NC-
Tool setting
1 V/DIV, 1 ms/DIV
Vehicle condition
Vehicle speed 30 km/h (19 mph): (3rd gear)
Engine speed 1400 rpm
Waveform 7

Reference: Terminal
NT+ - NT-
Tool setting
5 V/DIV, 0.5 ms/DIV
Vehicle condition
Vehicle speed 20 km/h (12 mph)
Waveform 8

Reference: Terminal
SPD - E1
Tool setting
5 V/DIV, 20 ms/DIV
Vehicle condition
Vehicle speed 20 km/h (12 mph)