2007-2013 Highlander Kluger · Service Manual TRANSMISSION

TERMINALS OF ECM

System information · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


ECM
G036662E27

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbols)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.

Terminals No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
D32-21 (D) - B3-1 (E1)
BR - W-B
D shift position switch signal
Ignition switch on (IG) and shift lever D and S position
11 to 14 V
Ignition switch on (IG) and shift lever except D and S position
Below 1 V
D32-11 (R) - B3-1 (E1)
G - W-B
R shift position switch signal
Ignition switch on (IG) and shift lever R position
11 to 14 V
Ignition switch on (IG) and shift lever except R position
Below 1 V
D32-8 (SPD) - B3-1 (E1)
LG - W-B
Speed signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 8)
D31-15 (STP) - B3-1 (E1)
R - W-B
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
D32-5 (SFTD) - B3-1 (E1)
BR - W-B
Down shift switch signal
Ignition switch on (IG) and shift lever S position
11 to 14 V
Ignition switch on (IG) and shift lever "-" position (Down shift)
Below 1 V
D32-6 (SFTU) - B3-1 (E1)
V - W-B
Up shift switch signal
Ignition switch on (IG) and shift lever S position
11 to 14 V
Ignition switch on (IG) and shift lever "+" position (Up shift)
Below 1 V
D32-20 (S) - B3-1 (E1)
SB - W-B
S shift position switch signal
Ignition switch on (IG) and shift lever S position
11 to 14 V
Ignition switch on (IG) and shift lever except S position
Below 1 V
D32-23 (P) - B3-1 (E1)
LG - W-B
Park position switch signal
Ignition switch on (IG) and shift lever P position
11 to 14 V
Ignition switch on (IG) and shift lever except P position
Below 1 V
D32-22 (N) - B3-1 (E1)
R - W-B
Neutral position switch signal
Ignition switch on (IG) and shift lever N position
11 to 14 V
Ignition switch on (IG) and shift lever except N position
Below 1 V
B2-8 (NSW (STAR)) - B3-1 (E1)
GR - W-B
Park neutral switch signal
Ignition switch on (IG) and shift lever P and N position
Below 1 V
Ignition switch on (IG) and shift lever except P and N position
11 to 14 V
B2-11 (DSL) - B3-1 (E1)
B - W-B
DSL solenoid signal
Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
Pulse generation
(See waveform 2)
B2-9 (SR) - B3-1 (E1)
Y - W-B
SR solenoid signal
Ignition switch on (IG)
Below 1 V
3rd, 4th or 5th gear
11 to 14 V
1st or 2nd gear
Below 1 V
B2-10 (S4) - B3-1 (E1)
L - W-B
S4 solenoid signal
Ignition switch on (IG)
Below 1 V
5th gear
11 to 14 V
Except 5th gear
Below 1 V
B2-17 (SL3+) - B2-16 (SL3-)
W - G
SL3 solenoid signal
Engine idle speed
Pulse generation
(See waveform 3)
B2-15 (SL2+) - B2-14 (SL2-)
Y - L
SL2 solenoid signal
Engine idle speed
Pulse generation
(See waveform 4)
B2-19 (SL1+) - B2-18 (SL1-)
G - GR
SL1 solenoid signal
Engine idle speed
Pulse generation
(See waveform 5)
B2-34 (NC+) - B2-26 (NC-)
R - BR
Speed sensor (NC) signal
Vehicle speed 30 km/h (19 mph): (3rd gear)
Engine speed 1400 rpm
Pulse generation
(See waveform 6)
B2-35 (NT+) - B2-27 (NT-)
W - L
Speed sensor (NT) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 7)
B2-13 (SLT+) - B2-12 (SLT-)
R - G
SLT solenoid signal
Engine idle speed
Pulse generation
(See waveform 1)
B2-24 (THO1) - B1-28 (E2)
P - BR
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
D32-27 (SNW1) - B3-1 (E1)
V - W-B
ECT SNOW switch signal
Ignition switch on (IG)
11 to 14 V
Ignition switch on (IG) and press continuously pattern select switch (ect snow switch)
Below 1 V

  1. G023426E01
    Waveform 1
    Reference: 
    Terminal
    SLT+ - SLT-
    Tool setting
    5 V/DIV, 1 ms/DIV
    Vehicle condition
    Engine idle speed

  2. C053420E05
    Waveform 2
    Reference: 
    Terminal
    DSL - E1
    Tool setting
    10 V/DIV, 100 ms/DIV
    Vehicle condition
    Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)

  3. G023426E01
    Waveform 3
    Reference: 
    Terminal
    SL3+ - SL3-
    Tool setting
    5 V/DIV, 1 ms/DIV
    Vehicle condition
    Engine idle speed

  4. G023426E01
    Waveform 4
    Reference: 
    Terminal
    SL2+ - SL2-
    Tool setting
    5 V/DIV, 1 ms/DIV
    Vehicle condition
    Engine idle speed

  5. G023426E07
    Waveform 5
    Reference: 
    Terminal
    SL1+ - SL1-
    Tool setting
    5 V/DIV, 1 ms/DIV
    Vehicle condition
    Engine idle speed

  6. C093866E09
    Waveform 6
    Reference: 
    Terminal
    NC+ - NC-
    Tool setting
    1 V/DIV, 1 ms/DIV
    Vehicle condition
    Vehicle speed 30 km/h (19 mph): (3rd gear)
    Engine speed 1400 rpm

  7. C053419E13
    Waveform 7
    Reference: 
    Terminal
    NT+ - NT-
    Tool setting
    5 V/DIV, 0.5 ms/DIV
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

  8. C053421E09
    Waveform 8
    Reference: 
    Terminal
    SPD - E1
    Tool setting
    5 V/DIV, 20 ms/DIV
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

← PROBLEM SYMPTOMS TABLE (from Jul 2010)TERMINALS OF ECM (from Jul 2010) →