2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT FRONT SEAT FRAME WITH ADJUSTER (DRIVER SIDE)

HINT:
*1: RHD
*2: LHD

  1. B081621E53
    Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → a2-1*1
      Battery positive (+) → b2-1*2
      Battery negative (-) → a2-2*1
      Battery negative (-) → b2-2*2
      Forward
      Battery positive (+) → a2-2*1
      Battery positive (+) → b2-2*2
      Battery negative (-) → a2-1*1
      Battery negative (-) → b2-1*2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E54
    Check operation of the seat frame (front vertical motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → a1-1*1
      Battery positive (+) → b1-1*2
      Battery negative (-) → a1-2*1
      Battery negative (-) → b1-2*2
      Upward
      Battery positive (+) → a1-2*1
      Battery positive (+) → b1-2*2
      Battery negative (-) → a1-1*1
      Battery negative (-) → b1-1*2
      Downward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E55
    Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → a10-2*1
      Battery positive (+) → b10-2*2
      Battery negative (-) → a10-1*1
      Battery negative (-) → b10-1*2
      Forward
      Battery positive (+) → a10-1*1
      Battery positive (+) → b10-1*2
      Battery negative (-) → a10-2*1
      Battery negative (-) → b10-2*2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E56
    Check operation of the seat frame (lifter motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → a3-2*1
      Battery positive (+) → b3-2*2
      Battery negative (-) → a3-1*1
      Battery negative (-) → b3-1*2
      Upward
      Battery positive (+) → a3-1*1
      Battery positive (+) → b3-1*2
      Battery negative (-) → a3-2*1
      Battery negative (-) → b3-2*2
      Downward

      If the result is not as specified, replace the seat frame with adjuster.


INSPECT FRONT SEAT FRAME WITH ADJUSTER (PASSENGER SIDE)

HINT:
*1: RHD
*2: LHD

  1. B081621E57
    Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → b2-2*1
      Battery positive (+) → a2-2*2
      Battery negative (-) → b2-1*1
      Battery negative (-) → a2-1*2
      Forward
      Battery positive (+) → b2-1*1
      Battery positive (+) → a2-1*2
      Battery negative (-) → b2-2*1
      Battery negative (-) → a2-2*2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

  1. B081621E59
    Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → b10-2*1
      Battery positive (+) → a10-2*2
      Battery negative (-) → b10-1*1
      Battery negative (-) → a10-1*2
      Forward
      Battery positive (+) → b10-1*1
      Battery positive (+) → a10-1*2
      Battery negative (-) → b10-2*1
      Battery negative (-) → a10-2*2
      Backward

      If the result is not as specified, replace the seat frame with adjuster.

← INSTALLATION (from Jul 2010)COMPONENTS (from May 2007) →