2007-2013 Highlander Kluger · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT KNOCK CONTROL SENSOR

  1. A065174
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    25°C (77°F)
    120 to 280 kΩ

    If the result is not as specified, replace the knock control sensor.

← REMOVAL (from Aug 2013)INSTALLATION (May 2007 – Jul 2008) →