DATA LIST / ACTIVE TEST
System information · Vehicles built from May 2007
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
When using the intelligent tester with the engine switch off, turn on and off any of the door courtesy light switches repeatedly at 1.5 or less second intervals until communication between the tester and vehicle starts.Turn the engine switch on (IG).
Read the DATA LIST.
Body: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
ACC SW
Engine switch on (ACC) / ON or OFF
ON: Engine switch on (ACC)
OFF: Engine switch off
-
IG SW
Engine switch on (IG) / ON or OFF
ON: Engine switch on (IG)
OFF: Engine switch off
-
Stop Light SW
Stop light switch / ON or OFF
ON: Brake pedal depressed
OFF: Brake pedal released
-
St SW1
Start switch 1 / ON or OFF
ON: Engine switch is pushed
OFF: Engine switch is not pushed
-
St SW2
Start switch 2 / ON or OFF
ON: Engine switch is pushed
OFF: Engine switch is not pushed
-
Str Unlock SW
Steering lock condition / ON or OFF
ON: Steering is unlocked (Engine switch on (ACC))
OFF: Steering is locked (Engine switch off)
-
N SW / C SW
Park/Neutral position switch / ON or OFF
ON: Shift position is P or N
OFF: Shift position is except P and N
-
SHIFT P SIG
Shift P position signal / ON or OFF
ON: Shift position is P
OFF: Shift position is not P
-
Vehicle Spd Sig
Vehicle speed signal / STOP or RUN
STOP: Vehicle is stopped
RUN: Vehicle is running
-
E/G Cond
Engine condition / STOP or RUN
STOP: Engine is stopped
RUN: Engine is running
-
IG1 Relay Mon1
IG1 relay monitor (outer) / ON or OFF
ON: Engine switch on (IG)
OFF: Engine switch off
-
IG2 Relay Mon1
IG2 relay monitor (outer) / ON or OFF
ON: Engine switch on (IG)
OFF: Engine switch off
-
IG1 Relay Mon2
IG1 relay monitor (inner) / ON or OFF
ON: Engine switch on (IG)
OFF: Engine switch off
-
IG2 Relay Mon2
IG2 relay monitor (inner) / ON or OFF
ON: Engine switch on (IG)
OFF: Engine switch off
-
ACC Relay Mon
ACC relay monitor / ON or OFF
ON: Engine switch on (ACC)
OFF: Engine switch off
-
Ratch Circuit
Ratch circuit / ON or OFF
ON: Engine switch on (IG) or engine is running
OFF: Engine switch off or on (ACC)
-
Start Req Sig
Starter request signal monitor / ON or OFF
ON: Starter relay is ON
OFF: Starter relay is OFF
Engine switch pressed and held with shift lever in the P or N position
Pwr Cond
Power supply condition / ALL, ACC ON, IG1 IG2, ST ON
ALL: All relays are OFF
ACC ON: ACC relay is ON
IG1: IG1 relay is ON
IG2: IG2 relay is ON
ST ON: ST request signal is ON
-
ACC Cut Sig
ACC relay cut signal / ON or OFF
ON: Engine is cranking
OFF: Engine is not cranking
-
St Relay Mon
STARTER relay monitor / ON or OFF
ON: Engine is cranking
OFF: Engine is not cranking
Engine is cranking with engine switch on (IG) and shift lever in P or N
Comm Smrt/Wrls
Communication for certification ECU (smart key ECU assembly) / OK or STOP
OK: Communication
STOP: No communication
-
| PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform ACTIVE TEST allows the relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the ACTIVE TEST early in troubleshooting is one way to save diagnostic time. The DATA LIST can be displayed while performing ACTIVE TESTs.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Perform the ACTIVE TEST according to the display on the tester.
| Tester Display |
Test Part |
Control Range |
Diagnostic Note |
| Lighting Ind |
Indicator for lighting |
ON / OFF |
- |
| Ind Condition |
Engine switch indicator |
Green / Amber / No Sig |
- |
| S Lock Pwr |
Power supply for steering lock ECU |
ON / OFF |
- |