DATA LIST / ACTIVE TEST
System information · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester on. When the intelligent tester cannot be turned on due to a malfunction or other problem, refer to PRECAUTIONS WHEN USING INTELLIGENT TESTER (Click here).
Read the Data List according to the display on the tester.
Entry & Start (Certification ECU (Smart Key ECU Assembly)): Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Touch Sensor
Driver side door touch sensor/ON or OFF
ON: Sensor is touched
OFF: Sensor is not touched
-
P Touch Sensor
Front passenger side door touch sensor/ON or OFF
ON: Sensor is touched
OFF: Sensor is not touched
-
D Trigger SW
Driver side door lock switch/ON or OFF
ON: Switch is pressed
OFF: Switch is not pressed
-
P Trigger SW
Front passenger side door lock switch/ON or OFF
ON: Switch is pressed
OFF: Switch is not pressed
-
Tr/B-Door Unlk
Back door opener switch/ON or OFF
ON: Switch is pushed
OFF: Switch is not pushed
-
IG SW
Engine switch/ON or OFF
ON: Engine switch is on (IG)
OFF: Engine switch is off
-
Unmatch V-ID
Unmatched vehicle-ID/YES or NO
YES: Key ID does not match vehicle
NO: Key ID matches vehicle
-
No Response
No response/YES or NO
YES: No response from key
NO: Response from key
-
Unmatch Format
Unmatched response code and format/YES or NO
YES: Key ID code does not match
NO: Key ID code matches
-
Low Battery
Key low battery/YES or NO
YES: Key battery voltage drops
NO: Key battery voltage is normal
-
P/S
10-Min
Power save counter - 10 minutes/Min.: 0; Max.: 255
Power save counter after door LOCK/UNLOCK-10 minutes
-
P/S
5-Day
Power save counter - 5 days/Min.: 0; Max.: 255
Power save counter after door LOCK/UNLOCK-5 days
-
P/S
14-Day
Power save counter - 14 days/Min.: 0; Max.: 255
Power save counter after door LOCK/UNLOCK-14 days
-
ACC SW
Engine switch/ON or OFF
ON: Engine switch is on (ACC)
OFF: Engine switch is off
-
Wrong Code
ID code difference/YES or NO
YES: Key ID code does not match
NO: Key ID code matches
-
Wrong C Code
Challenge code difference (Response)/YES or NO
YES: Key ID code does not match
NO: Key ID code matches
-
Wrong ID Code
ID code difference/YES or NO
YES: Key ID code does not match
NO: Key ID code matches
-
Wrong Rol Code
Rolling code difference/YES or NO
YES: Key rolling code does not match
NO: Key rolling code matches
-
Entry Cancel SW
Entry door lock function cancel/ON or OFF
Mode status is displayed
-
Glass Hatch Open Mode
Glass hatch open mode with vehicle locked/ON or OFF
Customization status is displayed
-
Back Door Open Mode
Back door open mode with vehicle locked/ON or OFF
Customization status is displayed
-
Key Lo-Batt Warm
Key low battery warning/ON or OFF
Customization status is displayed
-
Main Body (Main Body ECU): Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
IG SW
Engine switch/ON or OFF
ON: Engine switch is on (IG)
OFF: Engine switch is off
-
D Dor Cty SW
Driver side door courtesy light switch signal/ON or OFF
ON: Driver side door open
OFF: Driver side door closed
-
P Dor Cty SW
Front passenger side door courtesy light switch signal/ON or OFF
ON: Front passenger side door open
OFF: Front passenger side door closed
-
RR Dor Cty SW
Rear door courtesy light switch RH signal/ON or OFF
ON: Rear door open
OFF: Rear door closed
-
RL Dor Cty SW
Rear door courtesy light switch LH signal/ON or OFF
ON: Rear door open
OFF: Rear door closed
-
Back Door Courtesy SW
Back door courtesy light switch signal/ON or OFF
ON: Back door open
OFF: Back door closed
-
| PERFORM ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Perform the Active Test according to the display on the tester.
Entry & Start (Certification ECU (Smart Key ECU Assembly)): Tester Display
Test Part
Control Range
Diagnostic Note
Overhead Tuner
Entry door control receiver
ON/OFF
-
Fr Transmitter
Indoor electrical key oscillator (front)
ON/OFF
-
Rr Transmitter
Indoor electrical key oscillator (center)
ON/OFF
-
In Bdr Transmitter
Indoor electrical key oscillator (rear)
ON/OFF
-
Bdoor Transmitter
Outside electrical key oscillator (back door)
ON/OFF
-
P Select Sig
Front passenger side select
ON/OFF
-
Wireless Buzzer
Wireless buzzer
ON/OFF
-
Security Ind
Security indicator
ON/OFF
-
Main Body: Tester Display
Test Part
Control Range
Diagnostic Note
Trunk/Bdor Open
Back door opener switch signal
ON/OFF
-