2007-2013 Highlander Kluger · Service Manual STEERING

DIAGNOSTIC TROUBLE CODE CHART

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

If a trouble code is displayed during the DTC check, check the parts listed for that code in the table below and proceed to the appropriate page.

HINT:
The steering lock ECU does not store DTCs regarding the past problems.

STEERING LOCK SYSTEM: 
DTC Code
Detection Item
Trouble Area
See page
B2781
Open / Short in Steering Lock ECU
Steering lock actuator assembly (Steering lock ECU)
Click here
B2782
Power Source Control ECU Malfunction
1. Wire harness
2. Steering lock actuator assembly (Steering lock ECU)
3. Main body ECU
Click here
B2788
IG2 Signal Malfunction
1. IG2 relay
2. Wire harness
3. Main body ECU
4. Steering lock actuator assembly (Steering lock ECU)
Click here
← DIAGNOSTIC TROUBLE CODE CHART (May 2007 – Jul 2008)DIAGNOSTIC TROUBLE CODE CHART (from Jul 2010) →